USB- Oszilloscope 2 Chanel Incl. Adapters 4mm and Cabels

USB- Oszilloscope 2 Chanel Incl. Adapters 4mm and Cabels

USB- Oszilloscope 2 chanel incl. Adapters 4mm & cabels
Analog bandwidth: 10 MHz.
Oscilloscope with 2 channels.
Data transmission and power supply via USB.
Built in arbitrary function generator.
Kit contents and accessories
The oscilloscope kit contains the following items:
USB 2.0 (compatible with USB 3.0/3.1) cable
Two or x1/x10 passive probes
Channel1: two cable connectors / adapter BNC to banana 4mm
Channel 2: two cable connectors / adapter BNC to banana 4mm
2 cables red 5m with banana connector 4mm
2 cables black 5m with banana plug 4mm
Bandwidth 10 MHz
Sampling rate 100 MS/s
Recording memory 8 kS
AWG bandwidth 100 kHz
Vertical:
Bandwidth (-3 dB) 10 MHz
Rise time (calculated) 35 ns

Vertical resolution 8 bits
Optimized vertical resolution Up to 12 bits
Input ranges +/-50 mV, +/-100 mV, +/-200 mV, +/-500 mV,
+/-1V, +/-2V, +/-5V, +/-10V, +/-120V
Input sensitivity 10 mV/div to 4 V/div (10 vertical divisions)
Input characteristics 1 M0hm +/-1 % || 15 pF +/- 2 pF
DC current accuracy +/- 3% of full scale +/- 200 myV
Overvoltage protection +/-100 V up to 10 kHz
Horizontal:
Sampling rate 1 channel 100 MS/s
(real time) 2 channels 50 MS/s
Equivalent sampling rate (ETS) 2 GS/s
Sampling rate (USB streaming) 1 MS/s
Shortest time base 10 ns/div
Longest time base 5000 s/div
Other Specs:
Recording memory (block mode, shared by active channels) 8 kS
Recording memory (USB streaming mode), 100 MS (shared by the active channels)
Recording memory (USB streaming mode, PicoSDK) Up to available PC memory
WelIenform cache 10000
Dynamic behavior:
Cross-coupling (full bandwidth, uniform voltage ranges) Better than 200:1.
Distortion: <-50 dB at 100 kHz, full range input, typical
SFDR (100 kHz, input over full range, typical) > 52 dB
Noise: < 150 MyV rms (+/-50 mV range)
Bandwidth flatness: (+ 0.3 dB, - 3 dB) from 0 Hz to full bandwidth
Automatic measurements
Oscilloscope mode: AC eff, cycle time, DC average, duty cycle, edge count, falling edge count, fall rate, fall time, frequency, high pulse width,
low pulse width, peak-to-peak, rise time, rising edge count, rising rate, true rms value
Spectral mode:
Frequency at peak, amplitude at peak, THD dB, SNR, SINAD, SFDR, total power, average amplitude at peak, total harmonic distortion %, total harmonic distortion +N, IMD.
Statistics:
Mean and Deviation.