PLC Application: Machine Process Control System or Material Handling Process

PLC Application: Machine Process Control System or Material Handling Process

A compact teaching and practice unit for the control of a materials handling process using a PLC.
Two processes can be simulated: a punching process, or workpiece control in the form of a sort operation. All components are in a clearly laid out design.
Black and white cylindrical workpieces are fed from a container onto a conveyor belt.
On the belt is a reflex photoelectric proximity switch which differentiates between light and dark and feeds the white items to the pre-selected process (punching or sorting).
The black workpieces are always carried to the end of the belt, where they drop into a collector.
Compact training unit for experiments in the field of automation
Handling device with solenoid valves
Double acting cylinder (15 mm stroke): fixing /discharging of work pieces to container   
Double acting cylinder (80 mm stroke): pushes work piece onto conveyor belt  
Double acting cylinder (40mm stroke): executes the process (sorting or punching)
Conveyor belt with guide plates and DC motor  
Cylindrical Plexiglas storage container holding 11 work pieces  
15 work pieces made of Polyoxymethylene (POM): 10x white, 5x black
Pneumatic components fitted with quick-release couplings for 4mm hoses
Operation of actuators with compressed air
Lab jacks to external PLC  
Set of measuring leads and pneumatic hoses  
Compressed air supply: max. 6bar, 3bar recommended
3 electrically operated 5/2-way valves with spring return and with pilot valve.
Reflex photoelectric proximity switch pnp type and light switching of 5…150mm
Geared DC motor: with reduction ratio of 142.5:1, nominal torque 5.92 NM, nominal speed 22rpm.